FORUM CLOSED, PLEASE REGISTER AT FORUM.SIO2INTERACTIVE.COM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Rigid object sometimes falling through a static floor.

3 posters

Go down

Rigid object sometimes falling through a static floor. Empty Rigid object sometimes falling through a static floor.

Post  jonusx Fri Mar 13, 2009 9:53 pm

I'm trying to implement a coin flipper in my app and I'm having issues with keeping the coin from falling through the floor. It will work fine for a bit, then after a couple of flips it'll drop right through, or get stuck half-way, then fall through. Occasionally it'll just fall through the first time. I have other objects that will work just fine on the same static plane. Its just the coin. I've tried upping the poly count on both the coin and plane with no luck. I tried to change the bounds from cylinder to convex hull and that doesn't work. I've changes the fps and the physics stepping, nothing seems to work. My normals check good and I have proper vertex groups. I have no clue what to do next. I've been working on this issue for about 20 hours trying everything. If anyone has any advice I'll greatly appreciate it. I'm also having an issue trying to implement shadows. I've used tutorial 04 as a guide and the program runs fine but I don't get shadows. Is there any guidance on shadows? Thanks so much for the engine, it helped my app reach a higher level of quality then I thought possible.


Last edited by jonusx on Sat Mar 14, 2009 11:44 pm; edited 1 time in total

jonusx

Posts : 16
Join date : 2009-03-13

Back to top Go down

Rigid object sometimes falling through a static floor. Empty Re: Rigid object sometimes falling through a static floor.

Post  meteors Sat Mar 14, 2009 7:29 am

This is a common issue. Use the advanced search, and search for "floor" and "falling".


Best,
-joshua
meteors
meteors

Posts : 241
Join date : 2008-11-08
Location : Sunny Florida

Back to top Go down

Rigid object sometimes falling through a static floor. Empty Rigid object sometimes falling through a static floor.

Post  jonusx Sat Mar 14, 2009 11:45 pm

I looked all over the forums and still haven't found anything that helps. Also I can't get shadows to render

jonusx

Posts : 16
Join date : 2009-03-13

Back to top Go down

Rigid object sometimes falling through a static floor. Empty Re: Rigid object sometimes falling through a static floor.

Post  sio2interactive Sun Mar 15, 2009 12:37 am

http://forum.sio2interactive.com/about-the-sdk-f1/objects-falling-through-t179.htm

http://forum.sio2interactive.com/blender-sio2-f2/

For the shadow take a good look at tutorial04... and please take note that Im using planar shadow...
sio2interactive
sio2interactive

Posts : 1526
Join date : 2008-08-26
Age : 44
Location : Shanghai

http://sio2interactive.com

Back to top Go down

Rigid object sometimes falling through a static floor. Empty Re: Rigid object sometimes falling through a static floor.

Post  jonusx Mon Mar 16, 2009 12:27 pm

I found a temp fix for it. I know you mentioned margins for planes and to set them higher. When I did this the coin would bounce around at strange angles on the plane. So I actually just built a box right underneath the plane and now everything works fine. Except I still can't get those shadows. Is there anyone who has done shadows out there who can help. I've put objects into tutorial 04 and tagged those for shadows and that works. I've used the same code to use planar shadows for my project and it still doesn't work. I have my own lamp in the blender scene, is that the problem?

jonusx

Posts : 16
Join date : 2009-03-13

Back to top Go down

Rigid object sometimes falling through a static floor. Empty Re: Rigid object sometimes falling through a static floor.

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum